公司新闻
产品新闻
行业动态
 
Machine Maintenance-Automatic high speed carton erector/Automatic forming bottom sealer/Carton Sealer
2012-08-10
 
Automatic high speed carton erector:Components Maintenance
 
No. Name Lubricator oil
1 Motor Add lubricator oil per half year
2 Bearing Add lubricator oil per month
3 Bearing Add lubricator oil per month
4 Bearing Add lubricator oil per month
5 Linear guide Add lubricator oil per 12 hours
6 Linear guide Add lubricator oil per 12 hours
7 Five machine valve Clean per month
8 Vacuum filter/Blocked Clean by and generator air gun(per day)
9 Linear guide Add lubricator oil per 12 hours
10 Fisheye joint Add lubricator oil per 12 hours
11 Pneumatic Component (two united) When the water to 1/3 of cup,drain the water
12 Blade Add light machine oil per 8 hours
13 Chain wheel Add lubricator oil per month
14 Silencer Clean per month
15 Bearing set Add lubricator oil per 12month
16 Lengthen set bearing Add lubricator oil per 12month
17 Straight bearing Add lubricator oil per 12month
18 Set bearing Add lubricator oil per 12month

Automatic forming bottom sealer:

Pneumatic components: Firstly,notice the cleanness of air source.
So keep the air´s cleanness and supply enough air source in order to ensure the components´ motions, meanwhile, set the pressure at 5-6kg/c㎡, clean the shaft of cylinder frequently to prevent dust into the piston which causes air leaking.

If you need to dismantle the maintenance parts, you must note the air pipe whether be folded when return them back. If it´s gas barrier, put it ok to avoid air choking.             

Suction pad: keep cleanness of pad, avoid adhere the oil. Vacuum producer must be cleaned weekly. Must clean it frequently when cartons are dirty .

Serve units: check the water filter, look the water in the cup, if it´s too much, drain it to avoid the pneumatic components damaged. Suggestion: Draining the water once per day is probable. 

 
Carton Sealer:

Serve units: Check the oil, please add oil which is used for pneumatic (transparent oil) when it´s not enough. Notice: Must not use other oil to avoid the loop of pneumatic choking.

Check the water filter, look the water in the cup, if it´s too much, drain it to avoid the pneumatic components damaged. Suggestion: Drain the water once per day is probable. 

Blade: Add light machine oil per 8 hours.

Make the belt tighter a little probably after using the machine some days to make sure it´s not slip or damage the guide rail.

 
时时彩开奖号